Tusk Tools 1 views ♡

TUSK DIAMOND POLISHING PAD (with plastic backer): These premium quality diamond polishing pads feature a polishing pad and backer 'ALL-IN-ONE' design ready to be used on any angle grinder to polish a range of very hard materials into beautiful shiny pieces such as kitchen benchtops, concrete hearths...

Velcro backed polishing pads simply stick to the backing pad and then fixed to your angle grinder. Backing pad comes rigid, medium or flexible for easy polishing without gouging.

These premium quality diamond polishing pads can be used with any angle grinder to polish a range of very hard materials into beautiful shiny pieces such as kitchen benchtops, concrete hearths, garden art, custom poured concrete vanities. Designed to be used dry which in most situations is a lot eas...

The Tusk perfect for edge work when grinding concrete and in preparation for polishing. Ideal partner for a walk-behind floor grinder machine where cutting right into the edge is difficult. Featuring an aggressive cut like a traditional metal cup wheel but with a smoother finish and a minimal scratc...

Wet verses dry. which is better? There is no decisive answer, as in most cases, they are both as effective as each other. Wet polishing keeps the stone cool allowing for a better and more consistent shine on multiple surfaces. Wet pads tend to last longer than dry pads. Wet polishing traps dust part...

The TUSK 1650W electric mixer takes the hard work out of mixing dense and sticky building materials. Perfect for blending cement compounds, plaster, adhesives, solvent-free paint, varnish, and other similar substances.1650W Electric MixerMaterial: Carbon Steel & PlasticRated Voltage: 200 - 240VRated...

This mixing paddle boasts an M14 thread, making it a versatile tool for mixing a variety of materials. With the capability to mix plaster, glues, adhesives, render, and paint, this paddle saves time and increases efficiency in a wide range of tasks. Its sturdy construction ensures reliable performan...

60mm diameter designed with a longer adapter fit for use on the M14 angle grinder. Makes easy work of grinding concrete.

Aggressive for quick removal of stock. Great for keying ready for grout or glue. Good life.- GENERAL CONCRETE- Grinding plus coatings removal- Fastest most aggressive removal of stock- Great for keying ready for grout or glue- S Row Segment, diamond grit, 20/25 (fast bond)

Arrow segments will remove epoxy glue, paint and any other coatings.• ADHESIVE / EPOXY / PAINT• Concrete / Epoxy Glue / Coatings / Paint / Glue• Remover and general concrete• Arrow segment scrape and grinding with same timeArrow segment. Diamond Grit, 30/40 (middle bond)

Designed to grind lips and ridges down. Can be used as a general purpose grinder. Less sweep marks.• GENERAL CONCRETE• Strictly for general purpose grinding• Designed to grind lips and ridges down• Less sweep marksDouble Row. Diamond Grit 60/80 (middle bond)

Designed to grind flat surfaces to a near smooth finish. Minimal sweep marks. Easy to control how deep you grind.• GENERAL CONCRETE• Designed to grind flat surfaces to near smooth finish• Minimal sweep marks - easy control of grind depthDiamond Grit 80/100 (middle bond)

T segments float and give a near polished finish.• GENERAL CONCRETE• T-segments float and give a near polished finish• Great for salt & pepper lookDiamond Grit 100/120 (Middle Bond)

PCD’s are for scraping coatings from the floor or walls. A great system for smooth surfaces.• GLUE / VINYL / EPOXY• Concrete / Epoxy Glue / Coatings / Vinyl / Glue• Designed for scraping of coatings from floor or walls• Ceramic tile adhesive remover• Cement compounds - very aggressive gr...

TUSK CERAMIC FLAP DISKS are designed for rapid and aggressive stock removal and to smooth out welds, beads and burrs as well as rounding sharp edges. The s are made using a new resin technique which ensures a significantly longer life, grain retention and a resistance to freying ensuring a smooth, c...

Designed for builders and tilers to do light tidy up work. Designed for use with angle grinders for cured concrete and hard stone grinding. Available in 105, 115 and 125mm diameters and features triple turbo tooth segments of premium fast bond - 30/40 grit high quality diamond for reliability and sp...

Designed for fast aggressive stock removal. Tough, high density Single Crystal Aluminium Oxide abrasive grain is continuously exposed during use to maintain an aggressive cutting edge with less wear and a dramatically longer life than standard aluminium oxide disks.

Introducing the new TUSK. The fibres are embedded with coarse grade silicon carbide ensuring aggressive removal of surface applications such as rust, corrosion, epoxy resin, and paint without loading or damaging the metal surface leaving a fine finish.

Double cut design allows for rapid stock removal in harder materials. The addition of the left hand flutes reduce the pulling action, allowing better operator control. Widely used for metal work, tool making, model engineering, wood carving, jewellery making, welding, shaping, grinding, removal of s...

TUSK (FD) for aggressive stock removal on metal and other applications.TUSK s - Slotted bore design for use on Angle Grinders. Features a premium sharp ceramic grain for fast, aggressive (yet cool cutting and self sharpening), stock removal and long life. Ideal for cleaning & removal of surface impe...

TUSK DIAMOND FINGER BITS featuring vacuum braised diamond grit for fast cutting speed and long tool life. Used for enlarging, shaping, rounding or bevelling exisiting holes in hard ceramic, porcelain, marble, granite and stone. Features an M14 thread for use on angle grinders.