a little tuning co 426 views   1 clicks Claim this Business♡

Replace your fixed, cast aluminum factory rear toe links on your Gen 1 & Gen 1.5 Audi R8 with this performance engineered adjustable set from 034Motorsport!034Motorsport's Motorsport Adjustable Rear Toe Links facilitate simple and precise toe adjustments, making alignment changes for optimal track p...

tab-label-drop ship only, #product.info. >:first-child display: none; :034Motorsport Handling Packages contain staged upgrade packages specifically tailored for the Gen1/Gen1.5 Audi R8 powered by the V8 4.2L FSI or V10 5.2L FSI. The 034Motorsport Handling Packages contain curated products from the e...

2 -2.3° -3.5°NOTE: Total range may vary based upon whether you are stock height or lowered. Measurements above were collected with 034Motorsport Dynamic Lowering Springs installed.034Motorsport Motorsport Toe Links :Replace your fixed, cast aluminum factory rear toe links on your Gen 1 & Gen 1.5 A...

The Gen 1 & Gen 1.5 Audi R8 uses rubber front differential mounts which deflect under load, causing the delay of power transfer to the front tires, as well as leading to less-than-optimal handling characteristics during on-throttle and off-throttle transitions. These precision-machined billet alumin...

This is a direct replacement for your lost or damaged ZTF-01 Center Caps. This piece is machined from 6061 aluminum and offers the same great finish as your ZTF-01 wheels! The replacement center cap includes new o-rings and is easy to install!Looking for a new office paperweight? Look no further tha...

These high-temp silicone o-rings are designed to replace worn or lost o-rings on your 034Motorsport ZTF Center Caps.Each set is enough to replace one pair of O-rings on your ZTF Center Caps.

The engineers at KW have developed a sporty yet refined setup that allows you to individualy adjust the compression & rebound damping independently of each other. To ensure they provide the perfect suspension setup KW tests them on a KW 7-post rig, as well as extensive driving tests on country roads...

The engineers at KW have developed a sporty yet refined setup that allows you to individualy adjust the compression & rebound damping independently of each other. To ensure they provide the perfect suspension setup KW tests them on a KW 7-post rig, as well as extensive driving tests on country roads...

The engineers at KW have developed a sporty yet refined setup that allows you to individualy adjust the compression & rebound damping independently of each other. To ensure they provide the perfect suspension setup KW tests them on a KW 7-post rig, as well as extensive driving tests on country roads...

The engineers at KW have developed a sporty yet refined setup that allows you to individualy adjust the compression & rebound damping independently of each other. To ensure they provide the perfect suspension setup KW tests them on a KW 7-post rig, as well as extensive driving tests on country roads...

KW Height Adjustable Spring Kits for the Audi R8 with Magnetic Ride are a great alternative to conventional springs. You don’t have to settle for a fixed amount of lowering, as you can adjust the ride height of your Audi with the included KW Height Adjusters even after the Lowering Spring Kit has...

KW Height Adjustable Spring Kits for the Audi R8 without Magnetic Ride are a great alternative to conventional springs. You don’t have to settle for a fixed amount of lowering, as you can adjust the ride height of your Audi with the included KW Height Adjusters even after the Lowering Spring Kit h...

High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius.Take Note: don't be fooled by companies offering Porsche or Mercedes Ball nuts, they have a much wider diameter seat that does not fit correctly in VW/Audi wheels and ess...

High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head.Cone seat profile is compatible with most aftermarket wheels.Open ended so a stud can thread fully through.Sold in sets of 4 nuts! A 4-bolt car will need a quantity of 4, a 5-bolt car will need 5.

Are your driveshaft CV boots ripped after years of abuse underneath your car? Are you looking to replace your driveshaft CV Joint and protect it with a new rubber boot?If so, look no further than this Driveshaft CV Boot Repair Kit for the front or rear CV joints on the factory center driveshaft. Cen...

:Replace your stock rubber brake hoses with these performance-minded stainless steel braided lines from 034Motorsport! Unlike the stock rubber hose, this stainless steel braided hose will not bulge or expand with brake pressure, resulting in improved pedal feel, and more consistent braking performan...

034Motorsport is proud to offer this GiroDisc 380mm 2-Piece Performance Floating Front Rotor Upgrade for the B8/B8.5 Audi RS5, C5 Audi RS6, & Audi R8!The GiroDisc system is a direct replacement for the OE brake discs, meaning no modifications are necessary. This front rotor pair will bolt directly t...

034Motorsport is proud to offer this GiroDisc 2-Piece Performance Floating Rear Rotor Upgrade for the Audi R8!The GiroDisc system is a direct replacement for the OE brake discs, meaning no modifications are necessary. This rear rotor pair will bolt directly to the car and work with factory brake cal...