About this listing
Shoppo is an independent New Zealand shopping discovery platform. We do not sell products ourselves. Products on this page are sold by AWEIGHRACINGCONZ on their own website. Clicking "Visit Store" takes you directly to the retailer.

Own this business?
Claim your listing or request removal. Ok got it

AWEIGHRACINGCONZ 92 views 3 clicks ♡

www.ardimporting.co.nz 92 Birch Street, Hilltop

ARD Importing & Distribution import some fantastic brands like: WICKED AUDIO earbuds & headphones, ATOTO FOBO TYRE TPMS for cars & bikes, ROTARY BUM premix bottles, ZAMP Helmets & head restraints, PROFOX Race wear APEX PRO, QUICK CAPS Valve Caps, INTIMA Performance Brake Pads SPARTAN O2 sensors JRP digital dash

•

$11 ♡ +
6AN Straight Hose End
High quality 6AN straight hose end to suit braided hose.
Visit Store 0 0
$28 ♡ +
Rear Oil Return Blanking Plate for Nissan RB26DETT
Blanking plate for the rear turbo oil return port on Nissan RB26DETT engines.Supplied complete with fasteners & o-ring.CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand, and anodised black for great looks and corrosion resistance.We also manufacture 10AN & 12AN return...
Visit Store 0 0
$35 ♡ +
12AN Oil Return Flange for Nissan RB26DETT
12AN adaptor for the rear turbo oil return port on Nissan RB26DETT engines.Supplied complete with fasteners & o-ring.CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand, and anodised black for great looks and corrosion resistance.We also manufacture 10AN return adaptors...
Visit Store 0 0
$35 ♡ +
10AN Oil Return Flange for Nissan RB26DETT
10AN adaptor for the rear turbo oil return port on Nissan RB26DETT engines.Supplied complete with fasteners & o-ring.CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand, and anodised black for great looks and corrosion resistance.We also manufacture 12AN return adaptors...
Visit Store 0 0
$60 ♡ +
Heater Hose 10AN Fitting for Nissan RB Engines with 1/4" NPT Side Port
10AN heater hose adaptor fitting for the rear of the thermostat housing on Nissan RB Engines featuring a 1/4" NPT side port for plumbing turbo water lines.Compatibility:- Nissan RB20DE, RB20DET- Nissan RB25DE, RB25DET (Including Neo)- Nissan RB26DETT- Nissan RB30ET, RB30DETPlease note - the adaptor...
Visit Store 0 0
$500 ♡ +
Fagor 8050 CRT & MDI Unit
Fagor 8050 CRT & MDI panel.Part number MON. 50/55M 9-AMBRemoved from machine with faulty CPU board.Untested but powers on OK. Some images burnt into screen.International shipping not a problem.
Visit Store 0 0
$750 ♡ +
Fagor 8050 Rack & Fan 17-90122766
Fagor 8050 rack & fanPart number 17-9012766Version 02ARemoved from machine with faulty CPU board.International shipping not a problem.
Visit Store 0 0
$500 ♡ +
Fagor 8050 Power Supply 17-9012627
Fagor 8050 power supply board.Part number 17-9012627Version 08ARemoved from machine with faulty CPU board.Can supply with original connectors if required.International shipping not a problem.
Visit Store 0 0
$250 ♡ +
Fagor 8050 CPU Board (Faulty) 17-8041074
Fagor 8050 CPU BoardPart number 17-8041074Version 17ASuspected CPU fault as controller would not boot.Could be good for parts.Can supply with original connectors if required.International shipping not a problem.
Visit Store 0 0
$500 ♡ +
Fagor 8050 Axes Board 17-9012692
Fagor 8050 Axes board.Part number 17-9012692Version 17CRemoved from machine with faulty CPU board.Can supply with original connectors if required.International shipping not a problem.
Visit Store 0 0
$500 ♡ +
Fagor 8050 I/O Board
Fagor 8050 Input Output board.Removed from machine with faulty CPU board.Can supply with original connectors if required.International shipping not a problem.
Visit Store 0 0
$1,000 ♡ +
Glentek Dual DC Servo Drive GA4569EPA-04-2A-2
Removed from CNC machining centre being retrofit.Was used to drive Fanuc 20M & 10M DC Servo motors.- Model: GA4569EPA-04-2A-2
Visit Store 0 0
$300 ♡ +
Fanuc 30M DC Servo Motor 37Nm
Fanuc DC Servo Motor Model 30MA06B-0653-B005Removed from horizontal CNC machining centre being retrofit.Was Z axis motor.Fitted with aftermarket BEI 2000 line encoder for use with a Fagor system. Looks like original tacho is still inside yellow cap.- Torque at stall 37Nm- Amp at stall 24A- 210V- 120...
Visit Store 0 0
$300 ♡ +
Fanuc 10M DC Servo Motor 12Nm
Fanuc DC Servo Motor Model 10MRemoved from horizontal CNC machining centre being retrofit.Looks like the motor was fitted as a replacement around 2002, and only run for a year or two before the controller died.Was the X axis motor.Fitted with aftermarket BEI 2000 line encoder for use with a Fagor sy...
Visit Store 0 0
$300 ♡ +
Fanuc 20M DC Servo Motor 23Nm
Fanuc DC Servo Motor Model 20MRemoved from horizontal CNC machining centre being retrofit.Was the B axis motor.Fitted with aftermarket BEI 2000 line encoder for use with a Fagor system. Looks like original tacho is still inside yellow cap.- Torque at stall 23Nm- Amp at stall 18A- 213V- 1500RPM- 175m...
Visit Store 0 0
$300 ♡ +
Fanuc 30M DC Servo Motor 37Nm with Brake
Fanuc DC Servo Motor Model 30MRemoved from horizontal CNC machining centre being retrofit.Was the Y axis motor, so has brake.Fitted with aftermarket BEI 2000 line encoder for use with a Fagor system. Looks like original tacho is still inside yellow cap.- Torque at stall 37Nm- Amp at stall 24A- 210V-...
Visit Store 0 0
$54 ♡ +
2" Aluminium Weld-On Filler Neck & Cap
Aluminium Weld-On Filler Neck & Cap- Through hole size: 2" (50.8mm)- Cap diameter: 76mm- Overall height: 38mm- Neck weld-on diameter: 66.5mm- Captive sealing o-ring in cap.Available with black anodised or natural aluminium cap.
Visit Store 0 0
$39 ♡ +
1.5" Aluminium Weld-On Filler Neck & Cap
Aluminium Weld-On Filler Neck & Cap- Through hole size: 1.5" (38.1mm)- Cap diameter: 57mm- Overall height: 31mm- Neck weld-on diameter: 49.5mm- Captive sealing o-ring in cap.Available with black anodised or natural aluminium cap.
Visit Store 0 0
$38 ♡ +
1" Aluminium Weld-On Filler Neck & Cap
Aluminium Weld-On Filler Neck & Cap- Through hole size: 1" (25.4mm)- Cap diameter: 44mm- Overall height: 29mm- Neck weld-on diameter: 34.5mm- Captive o-ring in cap.Available with black anodised or natural aluminium cap.
Visit Store 0 0
$9.50 ♡ +
6AN to 5/16" Hose Barb Fitting
Anodised aluminium hose barb fitting.- Thread Size: 6AN- Hose Barb Size: 5/16" / 8mm- Colour: Black
Visit Store 0 0
$12 ♡ +
10AN to 5/8" Hose Barb Fitting
Anodised aluminium hose barb fitting.- Thread Size: 10AN- Hose Barb Size: 5/8" / 16mm- Colour: Black
Visit Store 0 0
$16 ♡ +
6AN to M14 Banjo Adaptor
Anodised aluminium banjo fitting.- Thread Size: 6AN- Hole Size: 14.5mm- Colour: BlackBanjo bolts and copper washers are also available.
Visit Store 0 0
$16 ♡ +
8AN Straight Hose End
High quality 8AN straight hose end to suit braided hose.
Visit Store 0 0
$80 ♡ +
Billet Radiator Bracket Set for Nissan R34
Billet radiator top bracket set for Nissan R34 Skyline vehicles.The brackets use the factory rubber bush, and are available in a range of anodised colours.They are CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand.Sold as a set of two brackets with stainless steel fast...
Visit Store 0 0