Wellforces 57 views   1 clicks Claim this Business♡

Envo DALI2 Wall Panel, 2 Buttons, White

Envo DALI2 Wall Panel, 2 Buttons, White

Envo DALI2 Wall Panel, 4 Buttons, Slim Silver

The PIR is a Mean Well power converter. Key Features- ✓ 3 years warranty

Hex-drive™ series Stand Alone Sensor Modules

Hex-drive™ series; 3-in-1 multi-drive Sensor head options

Hex-drive™ series; 3-in-1 multi-drive Sensor head options

Hex-drive™ series Sensor Antenna (SAM) Options

Envo Ceiling Mounted Microwave Daylight Sensor, 12/24/36V input, DALI2

Envo IP67 Microwave Daylight Sensor, 12/24/36V input, DALI2, Zhaga Socket

Features:- The Zigbee Door Window sensor is a wireless, battery powered contact sensor, compatible with the Zigbee 3.0 standard.- The device can be operated intelligently via working with a Zigbee gateway to communicate with other devices.- It is a zigbee low-energy wireless door/window sensor that...

Features:- Zigbee 3.0 compliant- Microwave motion detection, dual antennas, long detection range- Daylight harvesting- Works with 0-10V dim-to-off LED drivers- Autonomous sensor-based control- OTA firmware upgrade- Ceiling recessed installation- Can be use for indoor applications- Cost-effective sol...

Features:- Zigbee 3.0 compliant- PIR motion detection- Daylight harvesting- Works with 0-10V dim-to-off LED drivers- Autonomous sensor-based control- OTA firmware upgrade- Ceiling recessed installation- Can be use for indoor applications- Cost-effective solution for energy savings- Energy code compl...

Features:- Zigbee 3.0 compliant- PIR motion sensor, long detection range- Temperature sensing, automates your home heating or cooling- Humidity sensing, automates your home humidifying or dehumidifying- Illminance measuring, daylight harvesting- Autonomous sensor-based control- OTA firmware upgrade-...

Features:- Zigbee 3.0 compliant- Microwave motion detection- Daylight harvesting- Task tuning- Compact form factor- Works with 0-10V dim-to-off LED drivers- Autonomous sensor-based control- OTA firmware upgrade- Cost-effective solution for energy savings- Energy code compliance- Fits into existing a...

Features:- Zigbee 3.0 compliant- PIR motion detection- Daylight harvesting- Works with 0-10V dim-to-off LED drivers- Autonomous sensor-based control- OTA firmware upgrade- Ceiling recessed installation- Can be use for indoor applications- Cost-effective solution for energy savings- Energy code compl...

Features:- Zigbee 3.0 compliant- Microwave motion detection, long detection range- Daylight harvesting- Works with 0-10V dim-to-off LED drivers- Autonomous sensor-based control- OTA firmware upgrade- Zhaga book 18 socket- Plug & Play- IP65 rating, can be used for outdoor luminaires- Easily fit into...

Simplicity and small footprintFeatures:IR sensor for LED LightingCompact Probe opens up options for mounting

Product Type DIN-Rail Power SupplyLength (mm) 112Width (mm) 67Height (mm) 35Housing Color WhiteHousing Material PCMounting DIN-RailWeight (g) 125Input Domain ACInput Voltage 100 ~ 240V ACOutput Voltage 15V DCLED Output Current (max per output, mA) 200Output Current Max. (A) 0.2 Output Power Range (W...

Input Voltage: 100-240VAC 50/60Hz Input Current: 115VAC/≤0.09A, 230VAC/≤0.05A Out Current: 200mA Working Voltage: 15V working temp. -30℃～55℃ Dimension L135×W30×H20(mm) Package Size L140×W34×H23mm Weight (G.W) 75g

This DIN Rail Dali LED controller is suitable for dimming LED strips using a Dali signal. The controller has two output signals: a 10A and a 0-10V signal. This LED controller can be easily mounted on a DIN Rail.

- Latest DALI standard protocol IEC62386.- Support switch and dimming function.- DALI bus supply power.- The DIP switch can set address.- Support scene, group, unicast, broadcast mode.

- Latest DALI standard protocol IEC62386.- Support switch and dimming function.- DALI bus supply power.- The DIP switch can set address.- Support scene, group, unicast, broadcast mode.